Software supports all windows platform: Windows 98/2000/ME/NT/XP/win7/win8, both 32 bit and 64 bit system. Download the software+Wiring diagram+Software instruction link below. One door, Card enter, Card or button exit. 2 doors, Card enter, Card or button exit.
4 doors, Card enter, Button exit. Wiegand 26bit or 34bit(optional by hardware switch, default is 26bit). Note:"N" means quantity of Com ports or RS485 Hub's ports. High speed flash memory, keep data safe without power.
Max Distance from Reader to Controller. Max Distance from Controller to PC.
RS485:Max to 1,200M, Reliable value 1,000M, can be extended up to 3000 M by RS485 relay. TCP/IP:According to the network coverage. PCB1pcs, CD1pcs, Manual1pcs, Certificate1pcs, Carton 1pcs. Alarm when:Door un-closed overtime, unlawful entry or being Threatened.If theft or fire occurs, the software can alarm by PC's speaker. If the controller contact to "alarm external module", it can also drive the alarm Siren. Hold the door open/closed by software. Programmable Interrelation of doors' condition(open/closed). Note:you can setup the interrelation between the doors Arbitrarily, such as "only when door A is open &door B is closed, Door C can be openned".
Anti go back convertly, Anti followed. Note:This function means if a card has already exited, it can not exit again without enter.
Note:A door can be openned only when 2 or more cards are read(multiple persons are present). This function maybe useful for very important place. Programmable time of hold open. Note:can setup the door hold open at a specified time, maybe useful during the period of going to work every morning.
Note:Can easily know your doors' condition vividly from the software. Note:The door(s) can be hold closed, refuses both enter and exit in case of theft or other accident occurs. Note:If Initial Cards was activated, Only after Initial card is read, Other user cards can be available.
Note:Door can be set to openned only when card reading from both outside and inside of the door. Extensible pin code RFID reader(card+pin code/super password). Note:Door can be set to openned only when both card reading and pin code pressed.